Developing a measuring system for monitoring the thickness of the 6 m wide hdpe/ldpe polymer geomembrane with its continuous flow using automation equipment
Nikonova T. Zharkevich O. Dandybaev E. Baimuldin M. Daich L. Sichkarenko A. Kotov E.
November-1 2021MDPI
Applied Sciences (Switzerland)
2021#11Issue 21
As a result of R&D, a measuring system for controlling the thickness of the HDPE/LDPE (high-density polyethylene/low-density polyethylene) polymer geomembrane was developed using automation equipment. The relevance of this work consists of the development of a domestic, relatively inexpensive system for controlling the thickness of the HDPE/LDPE polymer geomembrane in production conditions based on modern equipment for enterprise automation. The scientific novelty consists of the use of original design solutions in the development of hardware and software complex mechanisms that allow controlling the thickness of the HDPE/LDPE polymer geomembrane layers along the entire width of the shaft, excluding deformation of the film as a result of foreign bodies entering during extrusion, cuts, monitoring the quality of the film in real time, as well as the possibility of analyzing the measured parameters in the database of the automated system.
Automatic control , High-density polyethylene , Laser sensor , Low-density polyethylene , Measurement , Metrology systems , Polymer geomembrane
Text of the article Перейти на текст статьи
Department of Technological Equipment, Mechanical Engineering and Standardization, Karaganda Technical University, Karaganda, 100027, Kazakhstan
Department of Mineral Deposit’s Development, Karaganda Technical University, Karaganda, 100027, Kazakhstan
Department of Automated Manufacturing Processes, Karaganda Technical University, Karaganda, 100027, Kazakhstan
Department of Technological Equipment
Department of Mineral Deposit’s Development
Department of Automated Manufacturing Processes
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026