Thermodynamic and experimental substantiation for obtaining ferrosilicon from tripoli
Mirkayev N.M. Shevko V.M. Aitkulov D.K. Badikova A.D.
2023EDP Sciences
Metallurgical Research and Technology
2023#120Issue 1
The article examines the results of studying the possibility of obtaining ferrosilicon from tripoli. The studies included the thermodynamic modeling using the HSC-6.0 software package, based on the minimum Gibbs energy principle, and electric melting of tripoli in an arc single-phase electric furnace. The effect of temperature and the amount of carbon on the extraction degree of silicon into alloys and the silicon concentration in these alloys were determined. It was found that the interaction products of tripoli with carbon and iron under equilibrium conditions are mainly FeSi2, Fe3Si, FeSi, Fe5Si3, SiC, SiO(g), CaSiO2, MgSiO3, Al, Si, CO; the silicon extraction degree of 70- 77% and its concentration in the alloy of 44.9- 47.7% were achieved in the temperature range of 1830- 2000- C in the presence of 34- 38% of carbon and 29% of iron; in the temperature range of 1700- 1900- C, the extraction degree of silicon into the alloy was 50- 77.1%, and the concentration of silicon in the alloy at 1900- C was 45- 45.85%. During the electric melting of tripoli together with coke and steel shavings, depending on the composition of the charge, FS25 and FS65 ferrosilicon was formed.
Electric melting , Ferrosilicon , Thermodynamic modeling , Tripoli
Text of the article Перейти на текст статьи
M. Auezov South Kazakhstan University, Kazakhstan, Tauke Khan 5, Shymkent, 160000, Kazakhstan
National Center on Complex Processing of Mineral Raw Materials of the Republic of Kazakhstan, Zhandosov st., 67, Almaty, 050036, Kazakhstan
M. Auezov South Kazakhstan University
National Center on Complex Processing of Mineral Raw Materials of the Republic of Kazakhstan
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026