STUDY OF THE OZONE CONTROL PROCESS USING ELECTRONIC SENSORS
BADANIE PROCESU KONTROLI OZONU ZA POMOCĄ CZUJNIKÓW ELEKTRONICZNYCH
Marxuly S. Abdykadyrov A. Chezhimbayeva K. Smailov N.
2024Politechnika Lubelska
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Srodowiska
2024#14Issue 438 - 45 pp.
In research work the problem of studying the process of ozone control with the help of electronic sensors is considered. In research work, special sensors were used, which are formed around coronary electrodes in the ozonator and to monitor the concentration of ozone in the room. This is because ozone is known to adversely affect human health if its maximum permissible air concentration exceeds 0.16 mg/m3. A small system of ozonators was developed in a special laboratory, theoretical and experimental tests were carried out. In practice, the obtained data and the electric diagram of the ozonator (on the ARDUINO platform) were collected. Prana Air sensors and current sensors were used to accurately det ermine the ozone (O3) concentration around the ozone nozzle to measure the current at the electrodes.
control systems , electric discharge , machine learning , monitoring , ozone control , sensors
Text of the article Перейти на текст статьи
Kazakh National Research Technical University named K. Satbayev, Department of Electronics, Telecommunications and Space Technologies, Almaty, Kazakhstan
Almaty University of Power Engineering and Telecommunications named after G.Daukeev, Department of Electric Drive and Automation of Industrial installations, Almaty, Kazakhstan
Kazakh National Research Technical University named K. Satbayev
Almaty University of Power Engineering and Telecommunications named after G.Daukeev
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026