Analysis of the Distillation Column of a Catalytic Cracking Unit Using Fuzzy Input Information
Kozhakhmetova D. Kaliyeva S. Sugurova L. Sugur Z. Wójtowicz R. Zhylkybayev T.
September 2024Multidisciplinary Digital Publishing Institute (MDPI)
Energies
2024#17Issue 17
The aim of this work is to analyze and model the performance of the distillation column of a catalytic cracking plant using fuzzy initial information. A system of mathematical models of the studied columns was developed, and we discussed the issues of modeling the distillation column of a catalytic cracking plant operating in conditions of fuzzy initial information. The system of mathematical models of the studied columns was developed on the basis of statistical and fuzzy information. The mathematical models of columns K-1, K-2 and K-3 were identified with regression and fuzzy regression equations, i.e., combined models of the main columns of the catalytic cracking plant were constructed. The purpose of this study was to create an optimal control system for the distillation column of a catalytic cracking unit using a mathematical model of the process. The results obtained in this work can be helpful during the design, modernization and optimization of equipment and installations, especially those used in the chemical and petrochemical industries. They can be useful both from a scientific and practical point of view, and they are also significant in terms of environmental protection, economy and mechanical engineering.
catalytic cracking , decision making , distillation column mechanical design , fractionation column , fuzzy logic , industrial equipment and systems
Text of the article Перейти на текст статьи
Department of Automation Information Technology and Urban Planning, Shakarim University, Glinka 20 A, Semey, 071412, Kazakhstan
Department of Radio Engineering, Electronics and Telecommunications, L.N. Gumilov, Eurasian National University, Astana, 010000, Kazakhstan
Department of Automation and Telecommunications, M.Kh.Dulaty Taraz Regional University, Suleymenov 7, Taraz, 080000, Kazakhstan
Department of Thermal and Process Engineering, Division of Industrial Equipment and Fluid Mechanics, Cracow University of Technology, Al. Jana Pawła II 37, Cracow, 31-864, Poland
Department of Automation Information Technology and Urban Planning
Department of Radio Engineering
Department of Automation and Telecommunications
Department of Thermal and Process Engineering
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026