DEVELOPMENT OF THE DESIGN AND TECHNOLOGY FOR MANUFACTURING A COMBINED FIBER-OPTIC SENSOR USED FOR EXTREME OPERATING CONDITIONS
Kabdoldina A. Ualiyev Z. Smailov N. Malikova F. Oralkanova K. Baktybayev M. Arinova D. Khikmetov A. Shaikulova A. Bazarbay L.
2022Technology Center
Eastern-European Journal of Enterprise Technologies
2022#5Issue 5-11934 - 43 pp.
The objects of research are the designs and manufacturing technologies of a combined fiber-optic sensor. It is used in extreme operating conditions. The essence of the task is to study the constructive and technological compatibility of optical and micromechanical principles of simultaneous measurement of several heterogeneous physical quantities. In this regard, the chosen modular conversion principle solves the problem of combined conversion. The developed design and technology of the electro-adhesive connection make it possible to significantly reduce the internal mechanical stresses in the sensor and thereby increase the stability of the combined sensors in extreme operating conditions. Analytical models linking the magnitude and orientation of internal mechanical stresses with the characteristics of temporary stability for complex structures, as a rule, are absent. In practice, the obtained research results can be applied to combined pressure and temperature sensors, pressure and vibration, etc.
Combination of functions , Connection , Electroadhesive , Etching , Fiber optic , Formation , Sensor , Stability
Text of the article Перейти на текст статьи
Department of Chemical Physics and Material Science, Al-Farabi Kazakh National University, al-Farabi ave.,71, Almaty, 050040, Kazakhstan
Department of Higher Mathematics and Modeling, Satbayev University, Satpaev str.,22 a, Almaty, 050013, Kazakhstan
Department of Electronics, Telecommunications and Space Technologies, Satbayev University, Satpaev str.,22 a, Almaty, 050013, Kazakhstan
Department of Information Technology, Almaty Technological University, Tole bi str.,100, Almaty, 050012, Kazakhstan
CSI D. Kunayev Secondary School, Shkolnaya str.,30,Praporshikova,East Kazakhstan, 070514, Kazakhstan
Department of Robotics and technical means of automation, Satbayev University, Satpaev str.,22 a, Almaty, 050013, Kazakhstan
Department of Mechanics and Engineering Auezov University, Tauke khan ave.,5, Shyment, 160012, Kazakhstan
International Information Technology University, Manas str.,34/1, Almaty, 050040, Kazakhstan
Department of Robotics and Technical Means of Automation, Satbayev University, Satpaev str.,22 a, Almaty, 050013, Kazakhstan
Department of Chemical Physics and Material Science
Department of Higher Mathematics and Modeling
Department of Electronics
Department of Information Technology
CSI D. Kunayev Secondary School
Department of Robotics and technical means of automation
Department of Mechanics and Engineering Auezov University
International Information Technology University
Department of Robotics and Technical Means of Automation
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026