Improvement of the Mechanical Properties of Reinforcing Bar Steel by Combined Deformation-Heat Treatment
Jaxymbetova M. Kanayev A. Kossanova I. Mazur I. Akhmedyanov A. Kirgizbayeva K.
2022Praise Worthy Prize
International Review of Mechanical Engineering
2022#16Issue 9460 - 466 pp.
The article is devoted to the improvement of the mechanical properties of reinforcing steel by means of combined deformation and heat treatment. One of the promising methods of hardening heat treatment is quenching from rolling heating (the metal is quenched immediately after leaving the finishing stand of the rolling mill). This type of heat treatment is combined with the process of hot plastic deformation and is based on the use of the residual heat of metal heating after hot rolling. It has the following advantages compared to other methods of hardening heat treatment: there is a steady relationship between the amount of martensite in the surface layers of reinforcing bars and the self-tempering temperature, which makes it possible to control and manage the process of thermal hardening of steel; the use of heat-strengthened rolled products with high mechanical properties in the sectors of the economy leads to a decrease in operating and capital costs in areas that consume hardened rolled products.
Carbon Content , Deformation-Heat Treatment , Hardening , Reinforcing Steel , Strength
Text of the article Перейти на текст статьи
S. Seifullin Kazakh Agrotechnical University, 62, Zhenis avenue, Nur-Sultan, 010011, Kazakhstan
Lipetsk State Technical University, 30, st. Moscow, Lipetsk, 398055, Russian Federation
L.N. Gumilyov Eurasian National University, 2, Satpayev str., Nur-Sultan, 010008, Kazakhstan
S. Seifullin Kazakh Agrotechnical University
Lipetsk State Technical University
L.N. Gumilyov Eurasian National University
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026