An enhanced analytical and numerical thermal model of frictional clutch system using functionally graded materials
Jabbar N.A. Hussian I.Y. Jweeg M.J. Aljibori H.S.S. Mohammed M.N. Abdullah O.I.
1 January 2024Walter de Gruyter GmbH
Curved and Layered Structures
2024#11Issue 1
When a component was built from a functionally graded material (FGM), the temperature of contact was determined using an analytical model (FGM). The analytical solution is applied using the concept of equivalent properties. In order to fully examine the dynamic of the equivalent property principle, a numerical analysis was done. The FGM (silicon carbide and aluminum) friction liner was used. It focuses on a few characteristics that have an impact, such as load, velocity, friction material type, and slip time, which appear in dimensionless form. The results show that for loads and velocities, the ratio of the rate of dissipation to the rate of generation of heat transfer is one, whereas the behavior differs for friction material and slip time. Furthermore, this study’s chosen FGM exhibits superior thermal behavior compared to Al and Sic, bolstering its viability as a friction liner in the clutch system.
analytical solution , FEM , friction dry clutches , functionally graded materials , thermal problem
Text of the article Перейти на текст статьи
Energy Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq
Mechanical Engineering Department, College of Engineering, Gulf University, Bahrain, Sanad, 26489, Bahrain
Al-Farabi Kazakh National University, Almaty, 050040, Kazakhstan
Mechanical Engineering Department, College of Engineering, University of Kufa, Najaf, Iraq
Mechanical Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq
College of Technical Engineering, Al-Farahidi University, Baghdad, 00965, Iraq
College of Engineering, University of Warith Al-Anbiyaa, Karbala, 56001, Iraq
Energy Engineering Department
Mechanical Engineering Department
Al-Farabi Kazakh National University
Mechanical Engineering Department
Mechanical Engineering Department
College of Technical Engineering
College of Engineering
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026