DEVELOPMENT OF THE PROJECT OF MODULAR PREFABRICATED BUILDINGS
Issabayev G. Slyambayeva A. Kelemeshev A. Amandykova D.
30 July 2022Scientific Route
EUREKA, Physics and Engineering
2022#2022Issue 436 - 45 pp.
The issues of working design with the construction of modular prefabricated buildings, with the minimization of cold bridges are revealed. Cold bridges are typical for prefabricated buildings with inadequate attention to the design of both load-bearing metal and enclosing structures, as well as their connections. Connections should not pass through its cross section both zero and negative temperatures. As a result, an original project of two modular buildings was developed from easily prefabricated metal structures and wall structures with light mineral wool filling. This project is also intended for sharply continental regional natural and climatic conditions (regardless of the geographical location on the territory of Republic of Kazakhstan – southeastern Republic of Kazakhstan, central, eastern or western Republic of Kazakhstan. In winter, natural and climatic conditions are similar in these areas). As a result of this study, it was found that the developed project meets the requirements of thermal insulation – at the interface of the supporting and enclosing structures. The thermal insulation requirements of the above structures are important to eliminate the dew point and consequently the formation of moisture and mold in all structures. In turn, mold and other microorganisms, as studies show, adversely affect the health and normal stay of people in the premises, both during the night and during the day. Many developers do not consider these factors in prefabri cated buildings. These buildings are inten ded for various industries. For example, in healthcare, these are mobile hospitals. In military camps – buildings of temporary residence as barracks, etc.
enclosing structures , load-bearing structures , metal profile , microclimate , modular prefabricated buildings
Text of the article Перейти на текст статьи
Department of Architecture, International Education Corporation, 28 Ryskulbekov str., Almaty, 050042, Kazakhstan
Department of Construction, International Education Corporation, 28 Ryskulbekov str., Almaty, 050042, Kazakhstan
Department of Design, International Education Corporation, 28 Ryskulbekov str., Almaty, 050042, Kazakhstan
Department of Architecture
Department of Construction
Department of Design
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026