Determination of forces in the working unit of the milling-rotary snow cleaner
Doudkin M. Kim A. Moldakhanov B.
2021Praise Worthy Prize
International Review of Mechanical Engineering
2021#15Issue 296 - 105 pp.
– The article presents the task of significantly increasing the efficiency of the rotary-milling snow cleaner and its performance without increasing the energy consumption for the work process (power), which will allow performing work on breaking snow blockages with a smaller number of machines, or in significantly less time. It has been established that during the operation of a rotary-milling snowplow, a serious complex problem arises, which consists in the fact that snow part is thrown forward by a screw feeder, forming a drawing prism. This increases the energy consumption for the development of snow and for moving the machine in the snow mass and at the same time reduces the snowplow productivity. Elimination of the drawing prism due to the use of an intensifier, for example, of a blade type, will reduce the energy consumption for the working movement of the snowplow. Thus, a decrease in the energy intensity of snow development and an increase in the efficiency of the working equipment of a rotary-milling snowplow based on the intensification of its working process is currently the most promising direction for improving this type machines.
Drag prism , Paddle intensifier , Rotary milling machines , Screw feeder , Snow , Snow blockages
Text of the article Перейти на текст статьи
Moscow automobile and road institute, Russian Federation
East Kazakhstan State Technical University, Kazakhstan
Ust-Kamenogorsk, Kazakhstan
Moscow automobile and road institute
East Kazakhstan State Technical University
Ust-Kamenogorsk
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026