Addition of Oil Sludge for the Production of Effective Wall Ceramics
Churikova L.A. Abdygalieva A.K. Yerbayev Y.T. Kuptleuova K.T. Zhapakhova A.U. Sarabekova U.Z. Sakitzhanov M.S.
October-December 2021Kalahari Journals
International Journal of Mechanical Engineering
2021#6Issue 3172 - 174 pp.
The article presents the results of experimental studies on the development of a composite additive using oil sludge for the production of effective wall ceramics and proves the possibility of obtaining high-quality wall ceramics in terms of reduced energy costs for resource-saving technologies by using conglomerate composition based on oil sludge has been established. The principal possibility of using oil sludge as an energy-releasing and modifying component in the production technology of wall ceramics has been established. At that, not only an economic effect is achieved but also an environmental effect due to the disposal of oil sludge along with the production of finished products.
Ceramic brick , Ceramic mass , Loess-like loam , Oil sludge , Recycling
Text of the article Перейти на текст статьи
West Kazakhstan agrarian-technical University named Zhangir khan, Uralsk, Kazakhstan
Kyzylorda State University named after Korkyt Ata, Kyzylorda, Kazakhstan
West Kazakhstan agrarian-technical University named Zhangir khan
Kyzylorda State University named after Korkyt Ata
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026