SIMULATION MODELING AND IMPROVEMENT OF THE WINDING DRUM COOLING CONDITIONS
Buzauova T. Amanov E. Kaizait Z. Mudrakov V. Sivachenko L.
2024Institute for research and design in industry
Journal of Applied Engineering Science
2024#22Issue 2393 - 401 pp.
At the Kaz-Metiz LLP plant, there has long been a problem of insufficient drums cooling due to the scale formation, which led to the need for frequent production stops to cool them. To solve this problem, simulation modeling of cooling drums with and without scale was carried out to investigate the heat spread over the body. The results of the stationary analysis in the Ansys application showed the heat propagation across the cross-section of the drum and proved that the resulting scale, having a low thermal conductivity, significantly reduces the heat exchange from the drum wall to water, as a result, the surface of the drum is significantly overheated. Subsequently, the improved drum cooling system was implemented in «Kaz-Metiz» LLP.
Ansys application program , cooling , simulation modeling , temperature , thermal analysis , thermal conductivity , winding drums
Text of the article Перейти на текст статьи
Karaganda Technical University named after Abylkas Saginov, Karaganda, Kazakhstan
«Kaz-Metiz» LLP, Karaganda city administration, Kazakhstan
Belarusian-russian university, Mogilev, Belarus
Karaganda Technical University named after Abylkas Saginov
«Kaz-Metiz» LLP
Belarusian-russian university
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026