Influence of Mineral Fillers on the Curing Process and Thermal Degradation of Polyethylene Glycol Maleate–Acrylic Acid-Based Systems
Burkeyeva G. Kovaleva A. Muslimova D. Havlicek D. Bolatbay A. Minayeva Y. Omasheva A. Zhakupbekova E. Nurmaganbetova M.
October 2025Multidisciplinary Digital Publishing Institute (MDPI)
Polymers
2025#17Issue 19
For the first time, the kinetics of isothermal curing and thermal degradation of polyethylene glycol maleate (pEGM)–based systems and their composites with mineral fillers were investigated in the presence of a benzoyl peroxide/N,N-Dimethylaniline redox-initiating system. DSC analysis revealed that the curing process at 20 °C can be described by the modified Kamal autocatalytic model; the critical degree of conversion (αc) decreases with increasing content of the unsaturated polyester pEGM and in the presence of fillers. In particular, for unfilled systems, αc was 0.77 for pEGM45 and 0.60 for pEGM60. TGA results demonstrated that higher pEGM content and the incorporation of fillers lead to increased thermal stability and residual mass, along with a reduction in the maximum decomposition rate (dTGₘₐₓ). Calculations using the Kissinger–Akahira–Sunose and Friedman methods also confirmed an increase in the activation energy of thermal degradation (Ea): EKAS was 419 kJ/mol for pEGM45 and 470 kJ/mol for pEGM60, with the highest values observed for pEGM60 systems with fillers (496 kJ/mol for SiO2 and 514 kJ/mol for CaCO3). Rheological studies employing three-interval thixotropy tests revealed the onset of thixotropic behavior upon filler addition and an increase in structure recovery after deformation of up to 56%. These findings underscore the potential of pEGM-based systems for low-temperature curing and for the design of composite materials with improved thermal resistance.
curing kinetics , mineral fillers , polyethylene glycol maleate , thermal stability , thixotropic properties , unsaturated polyester resins
Text of the article Перейти на текст статьи
The Department of Organic Chemistry and Polymers, Chemistry Faculty, Karagandy University of The Name of Academician E.A. Buketov, Karaganda, 100024, Kazakhstan
The Department of Inorganic Chemistry, Faculty of Science, Charles University, CZ-128 43 Prague 2, Albertov, 2030, Czech Republic
The Department of Organic Chemistry and Polymers
The Department of Inorganic Chemistry
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026