OPTIMIZATION OF PARTS CUTTING PROCESS PARAMETERS WORKING IN CONDITIONS OF CYCLIC LOADS
OPTYMALIZACJA PARAMETRÓW PROCESU CIĘCIA CZĘŚCI PRACUJĄCYCH W WARUNKACH OBCIĄŻEŃ CYKLICZNYCH
Barandych K. Vysloukh S. Tymchyk G. Murashchenko O. Smailova S. Kumargazhanova S.
2023Politechnika Lubelska
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Srodowiska
2023#13Issue 390 - 93 pp.
The paper is devoted to questions of technological fatigue life assurance of parts working in conditions of cyclic loads by optimization their cutting conditions for finish turning process. In order to solve the task of optimizing the parts cutting conditions, the corresponding software, based on the previously created mathematical model of the finishing turning process, was developed in the C# programming language. With the purpose of technological providing the necessary fatigue life of the part, taking into account the real conditions of its operation f or the maximum productivity of the finishing turning process, the methodical recommendations for determining the optimal parts cutting conditions at the phase of production technological preparation are given. An example application of the proposed solution is presented.
fatigue life , finishing turning process , optimization , technological support
Text of the article Перейти на текст статьи
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Kyiv, Ukraine
Vinnytsia National Technical University, Vinnytsia, Ukraine
D.Serikbayev East, Kazakhstan State Technical University, Ust-Kamenogorsk, Kazakhstan
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”
Vinnytsia National Technical University
D.Serikbayev East
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026