Correction to: Construction 3D printing: a critical review and future research directions (Progress in Additive Manufacturing, (2023), 8, 6, (1393-1421), 10.1007/s40964-023-00409-8)

Baigarina A. Shehab E. Ali M.H.
April 2025 Springer Science and Business Media Deutschland GmbH

Progress in Additive Manufacturing
2025 #10 Issue 4 3067 pp.

The publication of this article unfortunately contained mistakes. The funding note was not correct. The corrected funding note is given below. Wrong funding note: Funding This research is funded by the Ministry of Education and Science (MES), Republic of Kazakhstan, Grant No SEDS2022014. The Source of funding code is 055.01.01.) Correct funding note: This research is funded by the Ministry of Education and Science (MES), Republic of Kazakhstan, Grant No AP13068039. The source code of funding is 055.01.01. The original article has been corrected.

Text of the article Перейти на текст статьи

Department of Mechanical and Aerospace Engineering, School of Engineering and Digital Scinces, Nazarbayev University, Astana, 010000, Kazakhstan

Department of Mechanical and Aerospace Engineering

10 лет помогаем публиковать статьи Международный издатель

Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026