AUTOMATION SYSTEM AND CONTROL OF QUALITY MONITORING INSTRUMENTS FOR DRINKING WATER DISINFECTION USING CORONA DISCHARGE METHOD
Abdykadyrov A. Gali K. Kalandarov P. Almuratova N. Marxuly S.
2026Zibeline International Publishing Sdn. Bhd.
Water Conservation and Management
2026#10Issue 144 - 51 pp.
This study addresses the automation of a corona discharge-based drinking water disinfection system and its control using water quality monitoring tools. The research proposes an automated control system that dynamically adjusts the corona discharge parameters based on water quality parameters (pH, turbidity, electrical conductivity). The following key results were obtained: the system consistently maintained microorganism inactivation efficiency between 99,9% and 99,99%, even under fluctuating water quality conditions. For instance, at a turbidity level of 10 NTU, the disinfection efficiency dropped to 99,8%, while at pH values ranging from 6,5 to 8,5, the efficiency remained between 99,9% and 99,99%. The energy consumption was 20%-35% lower compared to traditional methods; for example, the energy consumption for UV irradiation methods ranged from 0,05 to 0,15 kWh/m3, while the corona discharge method remained between 0,5 and 2,0 kWh/m3. The initial models and control algorithms improved the systems performance in real-time, ensuring stable operation despite changes in water quality parameters. The results demonstrate the significant advantages of the corona discharge method in terms of energy efficiency and stability, proving its ability to maintain high disinfection efficiency even with continuous variations in water quality. Furthermore, this system provides an environmentally friendly and energy-efficient solution for drinking water disinfection.
automated control , Corona discharge , energy efficiency , environmental impact , feedback system , laboratory modeling , microorganism inactivation , plasma technologies , water disinfection , water quality
Text of the article Перейти на текст статьи
Satbayev University, Almaty, Kazakhstan
Mechanics and Machine Science Institute named after U.A. Zholdasbekov, Almaty, Kazakhstan
Tashkent Institute of Irrigation and Agricultural Mechanization Engineers National Research University, Tashkent, Uzbekistan
Almaty University of Power Engineering and TelecommunicationsThe institution will open in a new tab, Almaty, Kazakhstan
Satbayev University
Mechanics and Machine Science Institute named after U.A. Zholdasbekov
Tashkent Institute of Irrigation and Agricultural Mechanization Engineers National Research University
Almaty University of Power Engineering and TelecommunicationsThe institution will open in a new tab
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026