Three-Dimensional CFD Analysis of a Hot Water Storage Tank with Various Inlet/Outlet Configurations
Abdidin A. Seitov A. Toleukhanov A. Belyayev Y. Botella O. Kheiri A. Khalij M.
November 2024Multidisciplinary Digital Publishing Institute (MDPI)
Energies
2024#17Issue 22
This study presents a comprehensive 3D numerical analysis of thermal stratification, fluid dynamics, and heat transfer efficiency across six hot water storage tank configurations, identified as Tank-1 through Tank-6. The objective is to determine the most effective design for achieving uniform temperature distribution, stable stratification, and efficient heat retention in sensible heat storage systems, with potential for integration with phase change materials (PCMs). Using COMSOL Multiphysics 5.6, simulations were conducted to evaluate key performance indicators, including the Richardson number, capacity ratio, and exergy efficiency. Among the tanks, Tank-1 demonstrated the highest efficiency, with a capacity ratio of 84.6% and an exergy efficiency of 72.5%, while Tank-3, which achieved a capacity ratio of 70.2% and exergy efficiency of 50.5%, was identified as the most practical for real-world applications due to its balanced heat distribution and feasibility for PCM integration. Calculated dimensionless numbers (Reynolds number: 635, Prandtl number: 4.5, and Peclet number: 2858) indicated laminar flow and dominant convective heat transfer across all the configurations. These findings provide valuable insights into the design of efficient thermal storage systems, with Tank-3’s configuration offering a practical balance of thermal performance and operational feasibility. Future work will explore the inclusion of PCM containers within Tank-3, as well as applications for heat pump and solar water heaters, and high-temperature heat storage with various working fluids.
CFD simulation , inlet/outlet configurations , performance indicators , sensible heat storage , water storage tank
Text of the article Перейти на текст статьи
Department of Mechanics, Al-Farabi Kazakh National University, Almaty, 050040, Kazakhstan
Université de Lorraine, CNRS, LEMTA, Nancy, F-54000, France
Department of Mechanical Engineering, Satbayev University, Almaty, 050013, Kazakhstan
Department of Mechanics
Université de Lorraine
Department of Mechanical Engineering
10 лет помогаем публиковать статьи Международный издатель
Книга Публикация научной статьи Волощук 2026 Book Publication of a scientific article 2026